• display as grid Grid
  • display as list List

RITCHIE CALF CREEP FEEDER C/W LIFTING FRAME
RITCHIE CALF CREEP FEEDER C/W LIFTING FRAME
Main features: Robust all steel construction, hot dipped galvanised finish Full length trough fed from approximately 300 kgs capacity hopper Bird proof hopper is filled from a weatherproof, easily operated, sliding door at the rear of the feeder Adjustable header rail and adjustable width creep bars Fitted with skids for easy movement Recommended to be fixed down in exposed locations Our...
RITCHIE CALF CREEP HURDLE
RITCHIE CALF CREEP HURDLE
Robust unit with easily adjusted header rail to exclude cows from feed area Easily located using joining pins Hot dipped galvanised finish

BATEMAN RECTANGULAR FEED BIN ON SKIDS 10'
BATEMAN RECTANGULAR FEED BIN ON SKIDS 10'
The Bateman rectangular feeders have a welded trough, galvanised after manufacture. The trough sits on skids to keep feed off the ground. Vertical feed fence bars reduce wastage. 3000MM X 1370MM X 1400MM
CIRCULAR FEED RING - CATTLE - TOMBSTONE
CIRCULAR FEED RING - CATTLE - TOMBSTONE
The IAE Super Heavy Duty Tombstone Circle Feeder is extremely robust and practical, ideal for horned cattle. The main frame is constructed from 48.3mm tube whereas the tombstones are 38.3mm tube with infill bars that extend the full height of the feeder to give each section extra strength. Improved end plates on each section fit snugly together, increasing the overall strength of the unit yet further. ...

CIRCULAR FEED RING - CATTLE H/D - IAE
CIRCULAR FEED RING - CATTLE H/D - IAE
The Heavy Duty Circular Ring Feeder is manufactured in two sections bolted together 2135mm diameter x 1450mm high x 670mm deep welded base 20 feed spaces 38.1mm x 38.1mm SHS horizontal rails 35mm o/d tube vertical rails at 335mm approx. centres
CIRCULAR FEED RING - CATTLE H/D BATEMAN
CIRCULAR FEED RING - CATTLE H/D BATEMAN
The heavy duty specification cattle feed ring has a 610mm high sheeted skirt section with a diameter of 2290mm, supplied in two pieces to bolt together.

IAE HIGH DENSITY FEEDER C/W SHEETED BASE 10' X 5'
IAE HIGH DENSITY FEEDER C/W SHEETED BASE 10' X 5'
Sheeted floor feeding rectangular feeders (no trough) Accommodates Hesston type bales 610mm deep base 1520mm wide has 24 feed spaces 326.5mm between feed spaces Units have corner bracing for added strength May need some self assembly New mitred corner sits flush, giving even more strength and helps the unit to sit square in conjunction with the bracket when animals are feeding

IAE RECTANGULAR FEED BIN ON SKIDS 10'
IAE RECTANGULAR FEED BIN ON SKIDS 10'
Rectangular Feed Bin on Skids Steel Trough: Pre galvanised sheet metal feeding trough with centre ridge One drop down panel for ease of loading 3050mm long has 26 feed spaces 40mm x 40mm RHS main frame 35mm o/d tube vertical rails 48.3mm diameter skids May need some self assembly
IAE YEARLING CIRCULAR FEEDER
IAE YEARLING CIRCULAR FEEDER
The Yearling Circular Ring Feeder - 1600mm diameter x 1145mm high x 460mm deep welded base 18 feed spaces Manufactured in two sections bolted together 30mm x 30mm SHS horizontal rails 30mm o/d tube vertical rails at 279mm approx. centres

DIAGONAL FEED FENCE 14'6
DIAGONAL FEED FENCE 14'6
A proven feeding system which prevents floor wastage and bullying The 4420mm Long x 915mm high panels are designed to sit above an existing base Adjustable brackets enable panels to fix between, or on the face of, various stanchions & posts
IAE DIAGONAL FEED FENCE C/W TIMBER BASE 14'6
IAE DIAGONAL FEED FENCE C/W TIMBER BASE 14'6
4420mm (14'6'') long x 1370mm high supplied with adjustable or flat angle brackets 60mm x 40mm RHS horizontal rails 48.3mm o/d tube diagonal rails at 432mm approx. centres reduces bullying

IAE DIAGONAL FEED FENCE TIMBER BASE GATE UNIT 14'7
IAE DIAGONAL FEED FENCE TIMBER BASE GATE UNIT 14'7
Diagonal Feed Fence Gate Unit single-acting gate units with timber base complete with two built-in keyhole sliding bolts for added safety. Units have 25mm sleeved hinge eyes 1335mm high comes with 410mm timber base
IAE YOKEMASTER SELF LOCKING YOKE PANEL 7 YOKE
IAE YOKEMASTER SELF LOCKING YOKE PANEL 7 YOKE
Designed for dairy cattle, the YokeMaster self-locking yoke panel allows for cows to feed freely as they would at a standard feed barrier but it also allows for the animals to be locked into the panel through the use of a simple operating handle. Being able to lock the animals into the panel permits standard veterinary and welfare procedures, such as artificial insemination (AI) and pregnancy diagnosis...

IAE BADGER DEFENCE KIT ONLY T/S LOW LEVEL BEEF TROUGH
IAE BADGER DEFENCE KIT ONLY T/S LOW LEVEL BEEF TROUGH
After successful trials on farms in areas with high numbers of badgers, IAE has launched the Badger Defence beef trough. Designed to stop the badger's ingress to the animal's feed, preventing the spread of TB known to be caused by this, without harming the badger. 230mm approx. deep trough Comes with vertical legs as standard 2x welded RHS bracings for added strength Spinning rollers fitted...
IAE FREE STANDING CATTLE TROUGH - DOUBLE SIDED 8'
IAE FREE STANDING CATTLE TROUGH - DOUBLE SIDED 8'
Double Sided Free Standing Cattle Trough on Legs: Stands at 785mm high 895mm wide x 200mm approx. deep trough Comes with splayed legs (as standard) for stability Centre ridge to separate feed Option available complete with wheels at one end May need some self assembly

IAE LOW LEVEL BEEF TROUGH 8'
IAE LOW LEVEL BEEF TROUGH 8'
Low Level Beef Trough on Legs Stands at 675mm high 786mm wide x 230mm approx. deep trough Comes with straight legs as standard 2 x welded RHS bracings for added strength May need some self assembly
RITCHIE CALF FEEDING TROUGH 2.5MTR
RITCHIE CALF FEEDING TROUGH 2.5MTR
Hot dipped galvanised finish Free standing or wall mounted, advise on ordering Manufactured from 16 bg steel sheet with 30 mm x 30 mm hollow section legs

IAE DOUBLE SIDED LAMB CREEP FEEDER 4'
IAE DOUBLE SIDED LAMB CREEP FEEDER 4'
The IAE double sided lamb creep feeder features adjustable head/feed spaces to restrict feed access to larger animals if desired Head gaps adjustable from 60-180mm Unique easy exit lift-up ladder design for safety (reduces instances of head trapping) 460mm wide body x 650mm high with 728mm wide lid Supplied with 254mm rubber tyred wheels one end and stand at the opposite end Fitted with Protex...
IAE DOUBLE SIDED LAMB CREEP FEEDER 8'
IAE DOUBLE SIDED LAMB CREEP FEEDER 8'
The IAE double sided lamb creep feeder features adjustable head/feed spaces to restrict feed access to larger animals if desired. Head gaps adjustable from 60-180mm Unique easy exit lift-up ladder design for safety (reduces instances of head trapping) 460mm wide body x 650mm high with 728mm wide lid Supplied with 254mm rubber tyred wheels one end and stand at the opposite end Fitted with Protex...

IAE LAMB CREEP HURDLE 6'
IAE LAMB CREEP HURDLE 6'
Lamb Creep Hurdle with loop type coupling arrangement to ensure compatibility with interlocking sheep hurdles 1830mm long x 970mm high with 7 horizontal rails Creep apertures built in to a 535mm approx long opening at one end.
IAE SINGLE SIDED LAMB CREEP FEEDER & SHELTER 8'
IAE SINGLE SIDED LAMB CREEP FEEDER & SHELTER 8'
Single side lamb creep shelter features full length adjustable creep aperture Removable feed hopper 1200mm wide x 900mm high Supplied with 4 x 254mm wheels x 25mm bore rubber tyre May need self assembly

MTL LAMB CREEP FEEDER / SHELTER 4'X4'
MTL LAMB CREEP FEEDER / SHELTER 4'X4'
Manufactured from galvansied steel sheet. Access gained from one side only through easily adjusted horizontal bar. One full length hopper and trough easily filled.
RITCHIE LAMB CREEP HURDLE 1.2MTR
RITCHIE LAMB CREEP HURDLE 1.2MTR
Robustly constructed tubular steel frame Easily adjustable spacing between the rollers The steel rollers offer 3 width settings of 150 mm, 190 mm and 225 mm Simple frame fixings with joining pins Hot Dipped Galvanised Finish

RITCHIE LAMB CREEP HURDLE 2.5MTR
RITCHIE LAMB CREEP HURDLE 2.5MTR
Robustly constructed tubular steel frame Easily adjustable spacing between the rollers The steel rollers offer 3 width settings of 150 mm, 190 mm and 225 mm Simple frame fixings with joining pins Hot Dipped Galvanised Finish
CIRCULAR FEED RING - SHEEP - HORNED IAE
CIRCULAR FEED RING - SHEEP - HORNED IAE
1600mm diameter x 905mm high x 290mm deep welded sheet metal base Manufactured in two sections and fixed with coupling bars 25mm x 25mm SHS horizontal rails 20mm o/d tube vertical rails

CIRCULAR FEED RING - SHEEP STANDARD IAE
CIRCULAR FEED RING - SHEEP STANDARD IAE
The Standard Sheep Circular Ring Feeder is manufactured in two sections and fixed with coupling bars 1600mm diameter x 905mm high x 290mm deep welded sheet metal base 24 feed spaces 25mm x 25mm SHS horizontal rails 20mm o/d tube vertical rails at 213mm approx. centres
DOUBLESIDED HAY BASKET
DOUBLESIDED HAY BASKET
Double Side Mesh Hayrack 475 mm long x 475mm wide x 490mm deep Suitable for calf pens and lambing pens
£18.00
ex VAT £15.00

HOOK OVER CALF / SHEEP HAYRACK IAE 3'
HOOK OVER CALF / SHEEP HAYRACK IAE 3'
400mm wide x 420mm deep with 240mm high back 75mm x 75mm weldmesh and sheeted end panels Hot dip galvanised Hook brackets welded on
HOOK OVER CALF / SHEEP HAYRACK IAE 4'
HOOK OVER CALF / SHEEP HAYRACK IAE 4'
400mm wide x 420mm deep with 240mm high back 75mm x 75mm weldmesh and sheeted end panels Hot dip galvanised Hook brackets welded on

HOOK OVER CALF / SHEEP HAYRACK IAE 6'
HOOK OVER CALF / SHEEP HAYRACK IAE 6'
400mm wide x 420mm deep with 240mm high back 75mm x 75mm weldmesh and sheeted end panels Hot dip galvanised Hook brackets welded on
ROUND BALE FEEDER - SHEEP - GALV FLAT PACK
ROUND BALE FEEDER - SHEEP - GALV FLAT PACK
This bale cradle is ideal for the quick and easy feeding of sheep. The sturdy design and extra high sides maintains feed and reduces wastage. Main features: Extra high sides 1.25 m to help contain any spillage All hot dipped galvanised after manufacture Easy self assembly

SHEEP HAYRACK ON WHEELS BATEMAN 8'
SHEEP HAYRACK ON WHEELS BATEMAN 8'
The Bateman Sheep hayrack and manger comes complete with four heavy duty wheels for easy transportation. It also features an easy open lid with slide bolt fixings on one side
SHEEP HAYRACK ON WHEELS IAE 10'
SHEEP HAYRACK ON WHEELS IAE 10'
IAE Sheep Hayrack on Wheels now with new improved design 3000MM long 600mm wide x 813mm high Double sided 76mm x 76mm hayrack Supplied with 4 x 254mm wheels x 25mm bore with rubber tyre with 799mm wide lid c/w protex fastening and lid catch May need some self assembly

SHEEP HAYRACK ON WHEELS IAE 4'
SHEEP HAYRACK ON WHEELS IAE 4'
IAE Sheep Hayrack on Wheels now with new improved design 1250MM long 600mm wide x 813mm high Double sided 76mm x 76mm hayrack Supplied with 4 x 254mm wheels x 25mm bore with rubber tyre with 799mm wide lid c/w protex fastening and lid catch May need some self assembly
GALV SHEEP TROUGH 9'
GALV SHEEP TROUGH 9'
A quality standard sheep trough 284mm wide x 163mm deep Hot dip galvanised

IAE HOOK ON SHEEP / CALF FEED TROUGH 3'
IAE HOOK ON SHEEP / CALF FEED TROUGH 3'
Hook Over Sheep Trough 284mm wide x 123mm deep Hot dip galvanised Hook brackets supplied loose
IAE HOOK ON SHEEP / CALF FEED TROUGH 4'6
IAE HOOK ON SHEEP / CALF FEED TROUGH 4'6
Hook Over Sheep Trough 284mm wide x 123mm deep Hot dip galvanised Hook brackets supplied loose

IAE HOOK ON SHEEP / CALF FEED TROUGH 6'
IAE HOOK ON SHEEP / CALF FEED TROUGH 6'
Hook Over Sheep Trough 284mm wide x 123mm deep Hot dip galvanised Hook brackets supplied loose
JFC GROUND FEED TROUGH 3'
JFC GROUND FEED TROUGH 3'
Manufactured from tough impact resistant polyethylene. Designed with smooth surface to reduce feed build up and for ease of cleaning. Rounded edge design ensures animal safety. Benefits: Minimises waste by keeping feed off the ground. Will not rot or rust like traditional wooden / metal feeders. Suitable for wet and dry feed applications.

PAXTON LF280 FEED TROUGH 295MM WIDE X 2.8MTR LONG
PAXTON LF280 FEED TROUGH 295MM WIDE X 2.8MTR LONG
LF280 Feed Trough product features: 2.8 meter feed trough 54 litre capacity Double skin moulding for strength and durability. Easy clean surface with no dirt traps.