Cattle Handling & Feeding Equipment

The products detailed below are just a small selection from our extensive range.  Visit your local Country Store to see our full range or call 01653 605200 for more information.

Diagonal Feed Fence - no base

Diagonal Feed Fence - no base

3'0'' (915mm) High, 14'6'' - 15'2'' long the adjustable flat brackets enable panels to fix between or on the face of various stanchions & posts, no base.

Diagonal Feed Fence - with timber base

Diagonal Feed Fence - with timber base

4'6'' (1370mm) high - 14'6'' - 15'2'' long, the adjustable flat brackets enable panels to fix between or on the face of various stanchions, posts and timber base.

Circular Feeder

Circular Feeder

Yearling Circle - 1600mm (5'3'') dia x 1145mm high with 460mm deep welded base - 18 feed spaces.

Heavy Duty Circle - An upgraded circle 2135mm (7'0'') dia x 1450mm high with 670mm deep welded base - 20 feed spaces.

IAE Tombstone Ring Feeder

IAE Tombstone Ring Feeder

This heavy duty and practical IAE circular cattle feeder is suitable for cattle with horns with 12 feed spaces and manufactured in 3 sections. 2285mm diameter x 1150mm high

IAE Super Heavy Duty Calf Creep

IAE Super Heavy Duty Calf Creep

Featuring 455 litre capacity hopper, this unit is a robust construction with a heavier box section framework. It has the further advantage of allowing the vertical tubes to be adjusted as well as the horizontal creep bar. Once again the fork lifting facility and 3 point linkage are standard. Powder coated finish.2500mm (8'2 1/2'') long x 1800mm wide x 1500mm high.

IAE Feed Bins On Skids

IAE Feed Bins On Skids

Pre galvanised sheet metal trough with feed barrier surround and full length skids for ease of movement. One side panel drops down for loading. Two lengths are available. Both are 1370mm wide x 1360mm high.

Sizes available: 2400mm (8'0'') long with 22 feed spaces
                                  3050mm (10'0'') long with 26 feed spaces

IAE Hook Over Calf Hayrack

IAE Hook Over Calf Hayrack

IAE Hook Over Hayracks are formed from 75x75mm weldmesh with sheet metal end panels.

Sizes available: 610mm (2'0") long, 915mm (3'0") long, 1250mm (4'0") long, 1830mm (6'0") long, all are 400mm wide x 420mm high with 240mm mesh back.

IAE Hook Over Calf Trough

IAE Hook Over Calf Trough

Galvanised hook on calf trough with 2 braces. Dimensions (mm): (L)1830 x (W)287 x (H)145mm.

IAE Cattle Drinking Trough

IAE Cattle Drinking Trough

Cattle Water Trough comes with a drain plug and bung as standard. This product does not include a Service Box, this can be purchased separately

Sizes available: 2ft - 6ftW: 1ft 6" D: 1ft 4"

Ritchie Cattle Hurdle

Ritchie Cattle Hurdle

Our fully galvanised hurdles are robust and provide safety for operators and cattle. Robust Hurdles for race and penning, 2.5m and 3m length x 1.52m high. We also stock the Cattle Hurdle Joining Stakes.

Ritchie Calf Dehorning Crate

Ritchie Calf Dehorning Crate

Minimises stress to stock and operator. Single lever operation locks the neck yoke and nose band. Hinged door. Complete with belly band and rump strap. Good access for dehorning and castrating.

Ritchie Continental Handling Crate

Ritchie Continental Handling Crate

Fully automatic yoke with auto reset facility. Easily adjusted neck yoke widths. Complete access to both sides of animal with 8 door access. Ratchet type rump bar operation. Complete with rear gate and aluminium 5 bar treadplate floor.

Feed Bin

Feed Bin

Feed Bins are manufactured from pre galvanised sheet with pressed creases for extra strength. Units are all 640mm wide x 900mm high (back) x 841mm high (front). Tapered for ease of storage. Fitted with 50mm long butt hinges, 230mm long folding stays to hold lid open and two Protex lid catches.

Sizes available: Single - 420 litres, 2 section - 630 litres, 3 sections - 840 litres